|
|
|
|
Chief's
RPA SERIES ceiling mount with
the new exclusive All-Points™ Security System combines
classic features with reliable security to make the top selling
LCD projector mount better than ever. All-Points™ is
integrated into the RPA at no additional cost, is optional
to use and preserves all distinct features of the RPA including:
independent Roll, Pitch and Yaw adjustments, easy installation,
three possible mounting methods and low profile design. |
| All-Points™
Security System Chief's exclusive All-Points™ is an integrated
security system that uses tamper-proof parts and a steel-into-steel
design to lock the mount at all key connection points: bracket-to-projector,
mount-to-bracket, and Roll, Pitch and Yaw adjustments. |
|
| Chief's
RPA SERIES ceiling mount with
the new exclusive All-Points™ Security System combines
classic features with reliable security to make the top selling
LCD projector mount better than ever. All-Points™ is
integrated into the RPA at no additional cost, is optional
to use and preserves all distinct features of the RPA including:
independent Roll, Pitch and Yaw adjustments, easy installation,
three possible mounting methods and low profile design. All-Points™
Security System Chief's exclusive All-Points™ is an integrated
security system that uses tamper-proof parts and a steel-into-steel
design to lock the mount at all key connection points: bracket-to-projector,
mount-to-bracket, and Roll, Pitch and Yaw adjustments. |
FEATURES:
•
Integrated All-Points™ Security System
• Low profile, smooth line design
• No assembly–Easy installation
• Independent Roll, Pitch and Yaw adjustments
• Quick projector disconnect/reconnect
• Maintains registration with disconnect
• Three ceiling mounting methods
• Flush mount without disassembly
• Convenient lamp and filter access
• Cable management
• Natural convection ventilation
|
SPECIFICATIONS
Roll Adjustment: +/- 4 degrees adjustment up or down. Loosen
screw, adjust mount and tighten screw to hold adjustment.
Pitch Adjustment: +/- 25 degrees adjustment on each side of
the mount. Loosen screw, adjust mount and tighten screw to
hold adjustment. Full range of pitch in a flush mount installation.
Yaw Adjustment: 360 degrees can be made by turning the mount
on the threaded column and securing in place with set screw.
10 degrees yaw possible on flush mount using slots in top
of RPA. |
|
Mounting
Methods:
1. Flush Mount to suitable ceilings using the four
corner slots in top of the RPA mount. RPA now allows
you to flush mount without disassembly by providing
suitable access for screwdrivers and socket sets.
+/- 25 degrees of pitch when flush mounted. 10 degrees
yaw possible on flush mount with slots in top of
RPA (Hardware not included).
2. 1/4" Threaded Rod using the four corner slots
in the top of the RPA. (Threaded rod not included.)
3. 1 1/2" NPT Threaded Extension Column using the
threaded coupler at the top of the RPA mount. (Threaded
extension column not included.)
Convenient Lamp and Filter Access: Custom
design of most RPA Projector brackets provides needed
access for:
1. Quick lamp changes
2. Easy filter cleaning
3.
Proper projector ventilation
|
|
Quick
Projector Disconnect/Reconnect To
quickly and easily remove the projector from the ceiling:
loosen the thumb nuts on the bracket portion of the
mount and lift up and off removing projector and hanger
bracket. The universal top retains the registration
adjustments. This feature makes projector servicing
and maintenance quick and easy without having to re-register.
(Use included security Allen wrench to disconnect
when thumb nuts are replaced with All-Points™
Security System hardware.)
Lateral Shift Accessory
Chief's LSB-100 for RPA installations allows
3" right/left lateral adjustments to center the lens.
This accessory keeps the quick disconnect feature
of your RPA for easy projector disconnect/reconnect.
An additional 2 3/4" right/left lateral adjustment
is possible for projectors under 15 lbs. The LSB-100
comes with All-Points™ Security System hardware
to secure the lateral shift at RPA and bracket connection
points. |
|
|
FAQs
Q.
How does Chief's All-Points™ Security System work?
A. All-Points™ is included
with each RPA and is optional to use. The system locks in
the projector and mount with a steel-into-steel design by
replacing screws with security hardware at all key connection
points: Roll, Pitch and Yaw adjustments, bracket-to- projector
and mount-to-bracket.
Q.
How is the new All-Points™ Security System going to
keep the projector from being stolen?
A. Chief's exclusive All-Points™
system overcomes the weaknesses of many security accessories
on the market by using tamper-proof parts and a steel-into-steel
design that prevents potential offenders from being
able to cut or wrench components from the RPA.
Q.
How much assembly is required for the RPA?
A. None, just attach the bracket to your projector.
If you choose to use All-Points™ Security you will
need to replace indicated screws with included hardware.
No disassembly needed.
Q.
Do I have to order All-Points™ Security separately?
A. No, it is included in all RPA packages at no additional
cost and itÁs optional to use.
|
Q.
Do I have to order the projector bracket separately?
A. No, it ships complete when you order an RPA ceiling
mount. The SLB bracket is a separate part number and is used
only for Chief lifts. The RPA part number includes both the
universal top and SLB bracket.
Q. How much height will the RPA add to my installation?
A. The RPA top is only 1.75" high plus approximately
.75" for the projector bracket.
Q.
If I use the RPA with a Suspended Ceiling Kit do I need an
extension column?
A. Yes. Any 1 1/2" NPT threaded extension column will
work.
Q. How much weight does the mount hold?
A. Each mount is custom designed to support the weight
of the projector models specified, however, your ceiling must
hold at least 5x the weight of your installation.
Q.
How does the RPA design create natural convection ventilation?
A. Chief's brackets are custom
designed to allow for airflow that ventilates and helps cool
projectors. |
