|
Electric
Screen Control
|
Page
3 of 3
|
|
Serial
Control Board SCB-100
|
|
The
SCB-100 allows for control over a screen using RS-232C communication
and / or relay closures. Designed for the simplest to most
sophisticated system installations, a single Serial Control
board provides control over any single motor screen, masking
screen or projector lift.
The Serial Control Board is available as a factory installed
option inside the Contour, Advantage, Advantage Deluxe and
Director series screens, or in an external enclosure for
use with legacy screen and projector lift models.
|
SCB-100
Specifications:
I/O
Ports:
RS-232C Port 1 (normally used for the Da-Lite Ethernet-Serial
Adapter)
RS-232C Port 2 (normally used for a Third-Party Control
System)
Contact Closure (Relay 1), three-button wall switch
included
Contact Closure (Relay 2)
Peripheral Power: 12VDC, 500mA
|
|
|
NET-100
Ethernet-Serial Adapter
|
|
The
Ethernet-Serial Adapter allows any SCB-100 enabled screen
to be controlled over a local-area or wide-area network.
Using standard TCP/IP protocol and a 10Base-T connection,
the NET-100 can be easily integrated into almost any existing
local area network. With a built-in web server, a screen
may be accessed from any web browser software, such as
Microsoft® Internet Explorer, for control and status
information. SCB-100 required for use.
|
|
NET-100
Specifications:
I/O
Ports:
RS-232C (used to communicate with SCB-100)
10Base-T, RJ-45 Ethernet jack
IP Addressing: Static
Termination Type: Captive Screw Terminals
Power Requirements: 12VDC, 300mA (provided through
connection to SCB-100)
Required Accessories: SCB-100 Serial Control Board
|
|
|
For
complete projection packages, installation, exemplary
customer service and more, count on National Projector,
your local projection specialists!
Call
us today for a free custom system quote, Monday
thru Friday 8 am - 5 pm, PT
|
Page
1
2 3 •
Go to Screen Index
|
